Feb 17, 2003 #1 howdoi Mechanical Joined Jan 27, 2003 Messages 3 Location US In the "view" menu, where you can choose to show or hide planes, axes, dimensions, etc, the list is sometimes greyed out, with "hide all types" checked (also greyed out). What causes this?
In the "view" menu, where you can choose to show or hide planes, axes, dimensions, etc, the list is sometimes greyed out, with "hide all types" checked (also greyed out). What causes this?
Feb 17, 2003 #2 SBaugh Mechanical Joined Mar 6, 2001 Messages 6,691 Location US I assume your in an Assembly - Uncheck "Large assembly mode" under Tools. Best Regards, Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.3dmca.comfaq731-376 When in doubt, always check the help Upvote 0 Downvote
I assume your in an Assembly - Uncheck "Large assembly mode" under Tools. Best Regards, Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.3dmca.comfaq731-376 When in doubt, always check the help
Feb 17, 2003 Thread starter #3 howdoi Mechanical Joined Jan 27, 2003 Messages 3 Location US That was simple. Thanks. Upvote 0 Downvote