Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Go / No-Go Gauges for J1926-1 Ports

Status
Not open for further replies.
ajdjad

ajdjad

Mechanical
Joined
Jun 29, 2003
Messages
4
Location
US
I need help sourcing some inspection gauges for this style of thread. We use this on our counter bored header which sees 4,500psi. The o-rings are being damaged upon installation and failing during testing. I appreciate any help that can be given.

AJDJAD
 
Status
Not open for further replies.

Similar threads

dogbural
  • Locked
  • Question Question
Go/NoGo gauge tolerance
Replies
9
Views
2K
LittleInch
LittleInch
C
  • Question Question
Nondestructive Testing for Creep Detection
Replies
4
Views
3K
EdStainless
EdStainless
R
  • Question Question
Minimum required thickness for PAUT for process piping
Replies
2
Views
4K
Andrew ONeill
Andrew ONeill
A
  • Question Question
simulated PWHT cycles for deaerator
Replies
3
Views
4K
DekDee
DekDee
DMRAO
  • Locked
  • Question Question
MDMT for ss 316L pipe
Replies
2
Views
1K
0707
0707

Part and Inventory Search

Sponsor

Back
Top