Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Glass Transition Temperature Tg

Status
Not open for further replies.
Nomismum

Nomismum

Petroleum
Joined
Aug 24, 2008
Messages
8
Location
FR
My PU products are designed for temperatures below 40°C, however the Tg is only 50°C and I have reason to believe that they may reach temperatures of 50°C during storage prior to use if there is no intervention. Will the properties return to "normal" when they are cooled?

Thanks

Alison
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Joel_Lapointe
  • Question Question
Polymer maximum "service" temperature
Replies
0
Views
6K
Joel_Lapointe
Joel_Lapointe
T1G
  • Locked
  • Question Question
PLASTIC CAP CRAKING ON GLASS BOTTLES AFTER 7 TO 10 DAYS
Replies
1
Views
544
Pud
Pud
Bay_Area_Mech_Engr
  • Locked
  • Question Question
Recommended FEA yield criterion for 30% glass-filled LCP ?
Replies
1
Views
440
btrueblood
btrueblood
dgallup
  • Locked
  • Question Question
Can overheated glass filled nylon "shed" it's glass fibers?
Replies
4
Views
490
dgallup
dgallup
Tuckabag
  • Locked
  • Question Question
Low Temperature performance data for PEEK
Replies
0
Views
398
Tuckabag
Tuckabag

Part and Inventory Search

Sponsor

Back
Top