A couple of our guys have had the geometric elements disappear behind or under the solids in the models. Only the part of the line or curve that is exterior to the solid shows up. We don't know what caused the change nor can we find a visualization setting for this. They have had to delete the CatSettings to correct the problem. We are running R14.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Geometric elements (lines, curves, etc) disappear under solids. 1
- Thread starter l3ob
- Start date
