frayedknot
Mechanical
Where can I find information regarding the strength of a friction welded joint between aluminum (6061-T6) and copper (cold-drawn)?
Thanks!
Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Friction Welding
- Thread starter frayedknot
- Start date
- Status
Try The Welding Institute : ...and good luck
EnglishMuffin
Mechanical
You might also try - they might give you a rough idea. But friction welds all have to be developed, metallurgically checked, bend tested etc on an individual basis. As a rough guide, it will be almost as strong as the aliminum.
- Status
Similar threads
- Solved
