Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
friction stir welding
- Thread starter pradhanks
- Start date
mechdrive1
Mechanical
Hello,
I'm also trying to simulate a friction based welding process and facing problems in analysis. Can I know if you've run the analysis and if yes have you faced the problem of excessive distortion of meshing. If so, how did you overcome the problem ?
and a possible solution to your problem, is to define the tool as a rigid body and give it motion by using velocity/angular velocity in the same module and giving it an appropriate amplitude.
I'm also trying to simulate a friction based welding process and facing problems in analysis. Can I know if you've run the analysis and if yes have you faced the problem of excessive distortion of meshing. If so, how did you overcome the problem ?
and a possible solution to your problem, is to define the tool as a rigid body and give it motion by using velocity/angular velocity in the same module and giving it an appropriate amplitude.
- Status
Similar threads
- Locked
- Question