Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flame Hardening of Cast Iron Shell-Core Coreboxes

Status
Not open for further replies.
jaredhead

jaredhead

Materials
Joined
Sep 4, 2001
Messages
5
Location
AU
Does anyone have experience in flame hardening localised areas of coreboxes made of grey iron,used in the making of shell cores to extend the wear life? I am looking at alternative methods of extending our tool life.
 
Status
Not open for further replies.

Similar threads

mattyjb88
  • Question Question
Cast Iron Allowable Hertzian Stress
Replies
1
Views
2K
dgeesaman
dgeesaman
A
  • Question Question
Heat treatment of 17-4PH separately cast specimens
Replies
13
Views
14K
mfgenggear
mfgenggear
spsalso
  • Locked
  • Question Question
Quench hardening brass?
Replies
4
Views
1K
isoca
isoca
Tmoose
  • Locked
  • Question Question
ASTM A48 cast iron test bar size
Replies
2
Views
681
casting supplier
casting supplier
A M Contractor
  • Locked
  • Question Question
Tensile failure observed in Cast ASTM A494 Gr. CU5MCuC
Replies
9
Views
4K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top