redandysafc
Mechanical
Can anybody tell me were I would get a astm number for all fittings on 316,316L 304 and 304L. I think that forgings are A182 and fittings are Astm 403 . But can somebody put me on the right track please.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fittings for DIFFERENT TYPES OF STAINLESS STEEL 2
- Thread starter redandysafc
- Start date
- Status
-
1
- #2
Yes.
The product form information below is from Table 1 in ASME B16.34, which is referenced by ASME B16.11, which is the Specification for fittings
ASTM A 182 forged/forged bar
ASTM A 240 plate
ASTM A 479 bar
ASTM A 430 Tubular
ASTM A 376 "
ASTM A 358 "
ASTM A 312 "
The product form information below is from Table 1 in ASME B16.34, which is referenced by ASME B16.11, which is the Specification for fittings
ASTM A 182 forged/forged bar
ASTM A 240 plate
ASTM A 479 bar
ASTM A 430 Tubular
ASTM A 376 "
ASTM A 358 "
ASTM A 312 "
-
1
- #3
GRoStruc
Marine/Ocean
- Oct 11, 2006
- 23
A good cross reference for Stainless steels and various standards can be found here:
You can view, but to get a print-able copy you need to fill out a short survey. I never had any contact/spam from doing this.
You can view, but to get a print-able copy you need to fill out a short survey. I never had any contact/spam from doing this.
- Status
Similar threads
- Locked
- Question
- Question