Femap V9.0 force vectors

[AndyLake]

I’m using an NE Nastran and Femap 9.0. The problem is that I can’t possibly remove the constraint force vectors. Those vectors are still in place although “Deformed style” is setted to “None”. That’s not desirable when I want to present the element model without vectors. The only way to remove the vectors is to delete output set.

 

[ThomasH]

I'm not sure as to exactly what you mean but it might be that the freebody display is on. If so, try turning it off.

Good Luck

Thomas

 

[AndyLake]

That helps, thanks a lot!