Guest
Please do anyone know how to avoid the shape spinning when it is extruded along a 3DPolyline ( in example to draw a rivet)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
number 1 if you are using plain autocad you cannot extrude along a 3d polyline only a 2d one so nat is right your gonna have to try to revolve it
and if you do need to etrude along a 3d poly line break it down into straight segments and afterwards then union all the peices together the only other way i know of is to use mechanical desktop
and if you do need to etrude along a 3d poly line break it down into straight segments and afterwards then union all the peices together the only other way i know of is to use mechanical desktop
- Status
Similar threads
- Locked
- Question