suviuuno
Structural
- Jun 9, 2005
- 30
Greetings,
I am working with Patran. For fairly large model ~100 000 shell elements I am getting the following in the output file. I am running normal modes analysis.
MAIN: The FPU has been reset after floating point exception.
MAIN: For reference, A(MAINAL) = 73C3B0, A(/SYSTEM/) = 2554A00
MAIN: A(/XNSTRN/) = 3CC0020
MAIN: "Floating point zero divide" (C000008E) exception encountered.
MAIN: Exception occurred at address 017C162B.
MAIN: Context Flags 0001003F
MAIN: EAX 00000001 EBX 00000003 ECX 00000018 EDX 00000002 ESI 00000003 EDI 00000001
MAIN: EBP 041EE200 ESP 0012F0E4 EIP 017C1631 EFLAGS 00010202
MAIN: The 32 bytes around exception location 017C162B are --
MAIN: 017C161B D8 C8 D9 C3 D8 C8 DE C1 D9 C1 D8 C8 DE C1 D9 FA
MAIN: 017C162B DC 3D A8 71 4F 03 DC CA D9 CA DD 99 E8 82 C7 02
MAIN: FPU Control Word 0273 StatusWord A0A4 TagWord 55FF
MAIN: FPU EIP 017C162B OpCode 043D DataOffset 034F71A8
MAIN: Data at 034F71A8 is 00000000 0000F03F
MAIN: FPU Reg 0 (Tag 1) 00000000000000000000 ZERO
MAIN: FPU Reg 1 (Tag 1) 00000000000000000000 ZERO
MAIN: FPU Reg 2 (Tag 1) 80000000000000000000 ZERO
MAIN: FPU Reg 3 (Tag 1) 80000000000000000000 ZERO
MAIN: FPU Reg 4 (Tag 3) 4002B9B0FD0F00A4B000 EMPTY
MAIN: FPU Reg 5 (Tag 3) 00000000000000000000 EMPTY
MAIN: FPU Reg 6 (Tag 3) C001A99C10FC41ADE800 EMPTY
MAIN: FPU Reg 7 (Tag 3) 00000000000000000000 EMPTY
There are bunch of other stuff as well but this " Floating point zero divide" is disturbing. There are no fatal errors. As a result analysis will not get through. Any help greatly appreciated.
suviuuno
I am working with Patran. For fairly large model ~100 000 shell elements I am getting the following in the output file. I am running normal modes analysis.
MAIN: The FPU has been reset after floating point exception.
MAIN: For reference, A(MAINAL) = 73C3B0, A(/SYSTEM/) = 2554A00
MAIN: A(/XNSTRN/) = 3CC0020
MAIN: "Floating point zero divide" (C000008E) exception encountered.
MAIN: Exception occurred at address 017C162B.
MAIN: Context Flags 0001003F
MAIN: EAX 00000001 EBX 00000003 ECX 00000018 EDX 00000002 ESI 00000003 EDI 00000001
MAIN: EBP 041EE200 ESP 0012F0E4 EIP 017C1631 EFLAGS 00010202
MAIN: The 32 bytes around exception location 017C162B are --
MAIN: 017C161B D8 C8 D9 C3 D8 C8 DE C1 D9 C1 D8 C8 DE C1 D9 FA
MAIN: 017C162B DC 3D A8 71 4F 03 DC CA D9 CA DD 99 E8 82 C7 02
MAIN: FPU Control Word 0273 StatusWord A0A4 TagWord 55FF
MAIN: FPU EIP 017C162B OpCode 043D DataOffset 034F71A8
MAIN: Data at 034F71A8 is 00000000 0000F03F
MAIN: FPU Reg 0 (Tag 1) 00000000000000000000 ZERO
MAIN: FPU Reg 1 (Tag 1) 00000000000000000000 ZERO
MAIN: FPU Reg 2 (Tag 1) 80000000000000000000 ZERO
MAIN: FPU Reg 3 (Tag 1) 80000000000000000000 ZERO
MAIN: FPU Reg 4 (Tag 3) 4002B9B0FD0F00A4B000 EMPTY
MAIN: FPU Reg 5 (Tag 3) 00000000000000000000 EMPTY
MAIN: FPU Reg 6 (Tag 3) C001A99C10FC41ADE800 EMPTY
MAIN: FPU Reg 7 (Tag 3) 00000000000000000000 EMPTY
There are bunch of other stuff as well but this " Floating point zero divide" is disturbing. There are no fatal errors. As a result analysis will not get through. Any help greatly appreciated.
suviuuno