Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PARAM in MSCN to control the output of physical properties into the op2

Status
Not open for further replies.
iyermuku

iyermuku

Mechanical
Joined
Jan 29, 2008
Messages
2
Location
CA
In Simcenter Nastran, PARAM,OEPT,(YES/NO) determines whether to write the EPT data block.
Is there an equivalent entry in the MSCN input deck?
What datablock in MSCN op2 contains the physicals?
 
Status
Not open for further replies.

Similar threads

F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
imti7
  • Locked
  • Question Question
How to find the Max capacity of the foot bracket using FEA?
Replies
9
Views
1K
geesaman.d
geesaman.d
mike.etf
  • Locked
  • Question Question
Seeking Insights for Expanding a Polish Engineering Firm into the US Market
Replies
1
Views
242
SWComposites
SWComposites
netsonicyxf
  • Locked
  • Question Question
Why the symmetrical structure under self weight has unsymmetrical deformation?
Replies
3
Views
3K
netsonicyxf
netsonicyxf

Part and Inventory Search

Sponsor

Back
Top