Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Equivalent ASME B31.4 in EU

Status
Not open for further replies.

Cesarin2508

Mechanical
Aug 12, 2010
5
CA
Hi Everyone,

I am working in a French project and I would like to know what the EU standard equivalent to ASME B31.4. This project is about slurry concentrate pipeline.

Thanks in advance.

Regards,

Cesar
 
Replies continue below

Recommended for you

Perhaps EN 14161?

Huub
- You never get what you expect, you only get what you inspect.
 
Yup.

EN 14161 covers all pipelines except natural gas.

It is basically identical to ISO 13623.

Quite a nice code to use as it leaves a lot up to the designer.

You will not have an issue if you're familiar with b31.4 as it uses a lot of that code as the base mark.

Just be aware kid need to add manufacturing tolerance to the wt calc. But otherwise pretty similar.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Hi XL83NL & LittleInch,

Thanks for your answers.

Best regards,

Cesar
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top