jjfa
Mechanical
- Apr 13, 2004
- 9
Hello, Does anybody has information about a table in which equivalence between FAG and SKF bearings is available?.
I would appreciate your help ASAP.
I would appreciate your help ASAP.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Equivalence between FAG and SKF Bearings
- Thread starter jjfa
- Start date
- Status
Yes, go to look for the bearing interchange system. You will have to create a user name and password to use the system, but it should have the information you are looking for.
electricpete
Electrical
I am pretty sure you can do the same thing at
I am pretty sure the numbering is close. If you tell either one you want a 6313 with C3 internal clearance, double-shielded, they would know what you want.
=====================================
Eng-tips forums: The best place on the web for engineering discussions.
I am pretty sure the numbering is close. If you tell either one you want a 6313 with C3 internal clearance, double-shielded, they would know what you want.
=====================================
Eng-tips forums: The best place on the web for engineering discussions.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question