Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Eco Cut
- Thread starter javaid92
- Start date
What machine are you using? Eco cut is usally a faster process, standard is a slower process. Eco cut will not give a better finish that stanadard cut.
Basically, standard cut takes longer and gives a better cut, Eco reduces cutting times and gives a less of a perfect finish.
Basically, standard cut takes longer and gives a better cut, Eco reduces cutting times and gives a less of a perfect finish.
LASERNINJA
Mechanical
It is my understanding that the ECO cut refers to using the ECO cone. The only difference between the standard cone and ECO is the ECO has Nozzle cooling. Its that air hose that comes off the side of the cone. This keeps the double nozzles from melting or burning out on the inside.
- Status
Similar threads
- Question
