Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drift Size for 7.5" Honed ID

Status
Not open for further replies.
lyvince

lyvince

Mechanical
Joined
Jan 23, 2002
Messages
5
Location
SG
Is there any standard for drift gauge to drift a 7.5" ID, honed with 32 finishing? We are going to use teflon to make the gauge.

By the way, it's not an API standard casing/tubing.

Thanks.

Vince
 
Sort by date Sort by votes
Most of the honed tubing that I buy has a tolerance specified by the manufacturer of +0.000/-0.005.

Cheers,

DenAnde
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Question Question
Minimum required thickness for PAUT for process piping
Replies
2
Views
4K
Andrew ONeill
Andrew ONeill
A
  • Question Question
simulated PWHT cycles for deaerator
Replies
3
Views
4K
DekDee
DekDee
C
  • Question Question
Nondestructive Testing for Creep Detection
Replies
4
Views
3K
EdStainless
EdStainless
PAPAMAO
  • Locked
  • Question Question
POSITION TOLERANCE'S DATUM WITH "><"SYMBOL
Replies
2
Views
329
PAPAMAO
PAPAMAO
Julius_B
  • Locked
  • Question Question
"Visual Quality Control Inspectors are able to find every defect"
2
Replies
21
Views
2K
bryjarmoc
bryjarmoc

Part and Inventory Search

Sponsor

Back
Top