Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Display young modulus on models

Status
Not open for further replies.
Norbert31

Norbert31

Automotive
Joined
Sep 12, 2012
Messages
1
Location
FR
Hello,

I have a model with one different material properties per element (issued from Moldflow analysis). I would like to display the young modulus (and then the coefficients of thermal expansion) in the global coordinate system using a color scale.

I didn't find any way to do this, and the official ansys support was not able to help me ...

Would you have any tips please ?
 
Status
Not open for further replies.

Similar threads

nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
827
Rabea-19
R
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
2K
IJR
IJR
bkal
  • Locked
  • Question Question
Mode Selection Based on the Mode Coefficients
Replies
0
Views
446
bkal
bkal

Part and Inventory Search

Sponsor

Back
Top