Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Differet laser modes on mazaks

Status
Not open for further replies.
fab3

fab3

Industrial
Joined
Dec 4, 2008
Messages
33
Location
US
I run a 89' 2500 watt mazak, I use M67 for all profiles, excluding 3/16" and 1/4" SS. I use M68 for anything smaller that 1". Does anybody use M69?
 
Status
Not open for further replies.

Similar threads

D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
S
  • Locked
  • Question Question
LD1 Alarm Amada 6kW Fiber Laser
Replies
0
Views
1K
SiemensN00b
S
B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
451
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top