Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

design based on canadian steel code

Status
Not open for further replies.
dgkhan

dgkhan

Structural
Joined
Jul 30, 2007
Messages
322
Location
CA
Please see attached file. If you design based on Canadian steel code S16-01, the beam (story 6) shows red color but if you see detail, it's formula answer is much less.
 
Status
Not open for further replies.

Similar threads

RAJAVARDHAN
  • Locked
  • Question Question
ETABS VBA Code
Replies
3
Views
554
sticksandtriangles
sticksandtriangles
X4vier
  • Locked
  • Question Question
"do you want to reiterate analysis and design" Option not available on ETABS 22
Replies
4
Views
1K
Luceid
Luceid
Ganesh_maka
  • Locked
  • Question Question
EtabsApi: Specify code to load pattern
Replies
2
Views
531
Ganesh_maka
Ganesh_maka
SteelStructureDesign
  • Locked
  • Question Question
Seismic Des. Parameters for London/UK - Code: Eurocode8-2004 (Steel Des. Code: BS5950-2000)
Replies
1
Views
252
ZXLeung
ZXLeung
ARPASEVAN
  • Locked
  • Question Question
Read multiple points on a line element
Replies
3
Views
2K
sticksandtriangles
sticksandtriangles

Part and Inventory Search

Sponsor

Back
Top