T
thilag1981
Guest
Hello Friends
Nx Version Nx 9 or Nx 11 both Teamcenter Integerated.
Nx Module Assembly
I need a customized Clash analysis with 2 things.
1) Without Touch data with only Hard data.
2) If a Bolt is assembled in a flange (in first one time and patterned for 23 times – Total 24 times). If there is `Hard’ i.e., interference exits then 48 times it produces the report.
2.1) 24 Times of Hard Bolt with flange and
2.2) 24 Times of Flange with Hard Bolt.
So need a customized report with options / presettings as
A) Without Touch data and
B) Only one line of Hard data as Bolt with flange or atleast 2 lines of Hard data as Bolt with flange and Hard data Flange with Bolt
Is there any way to do this.
Regards
thilag
Nx Version Nx 9 or Nx 11 both Teamcenter Integerated.
Nx Module Assembly
I need a customized Clash analysis with 2 things.
1) Without Touch data with only Hard data.
2) If a Bolt is assembled in a flange (in first one time and patterned for 23 times – Total 24 times). If there is `Hard’ i.e., interference exits then 48 times it produces the report.
2.1) 24 Times of Hard Bolt with flange and
2.2) 24 Times of Flange with Hard Bolt.
So need a customized report with options / presettings as
A) Without Touch data and
B) Only one line of Hard data as Bolt with flange or atleast 2 lines of Hard data as Bolt with flange and Hard data Flange with Bolt
Is there any way to do this.
Regards
thilag
