I doubt it is allowed to post copy-written material on these forums, but I am looking at a pdf of it.
Category 0: basic certification, strength tests
sampling aggregates for use in concrete, sampling plastic concrete, making and curing compression and flexural test specimens, air content, slump, compressive strength
Category 1: intermediate certification, mix design tests
all of the above plus a bunch of aggregate tests, concrete mixing in the lab, air content by volumetric method, obtaining and drilling cores for compressive strength test
Category 2: Advanced certification, advanced tests
all of the above plus a few more aggregate tests, water absorbtion of concrete, making curing and testing compression test specimens of no-slump concrete.