Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CSA Standard A283

Status
Not open for further replies.

ajk1

Structural
Joined
Apr 22, 2011
Messages
1,791
Location
CA
DOES ANYONE HAVE A COPY OF CSA STANDARD A283, QUALIFICATION CODE FOR CONCRETE TESTING LABORATORIES? I KNOW THERE IS SUCH A THING AS CATEGORY 1 CERTIFICATION. IS THERE SUCH A THING AS CATEGORY 0 CERTIFICATION? IF SO, HOW DOES IT DIFFER FROM CATEGROY 1 CERTIFICATION?
 
I doubt it is allowed to post copy-written material on these forums, but I am looking at a pdf of it.

Category 0: basic certification, strength tests

sampling aggregates for use in concrete, sampling plastic concrete, making and curing compression and flexural test specimens, air content, slump, compressive strength

Category 1: intermediate certification, mix design tests
all of the above plus a bunch of aggregate tests, concrete mixing in the lab, air content by volumetric method, obtaining and drilling cores for compressive strength test

Category 2: Advanced certification, advanced tests
all of the above plus a few more aggregate tests, water absorbtion of concrete, making curing and testing compression test specimens of no-slump concrete.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top