Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating a new drawing layout template 3

Status
Not open for further replies.
What drawing package are you using? Does it not have built-in templates which conform to (or are close to) the UK standard?
 
I'm sure that's a nice book, but $270.00 :o

We're using Autodesk Inventor. We have a template already, but I want to make sure it matches up to spec.
 
The NASA manual is written against ASME Y14 documents. There should be some ISO documents that cover the same information.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
ISO 5457 cover sheet format, ISO 7200 Title blocks
 
That's what we use.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
There is or was a Def Stan that addressed it as I recal, but my memory might be playing up. If you're doing govt work you may want to check that out. Most def-stans are available for free online, or at least used to be.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top