Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

control the size of Datum1

Status
Not open for further replies.
uwam2ie

uwam2ie

Automotive
Joined
Jul 11, 2005
Messages
1,008
Location
DE
I want to set up the datum1 in ordinate dimensions origin from part defaults. I'm able to to so for the standard size d= 10mm, but I can not setup a size d=3mm. Is there something like size control string for the datum1 - scaling or any ideas?
thx in ad
 
Sort by date Sort by votes
Also have been wondering this, but as far as I have seen there is none.
 
Upvote 0 Downvote
thx on reply
i solved editing the ug_standard.sbf file -very tricky ;)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

skibum13
  • Locked
  • Question Question
NX12 Color Palette Size Issue
Replies
2
Views
704
skibum13
skibum13
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N
nxprog
  • Question Question
Reuse assemblies in the Reuse Library
Replies
1
Views
3K
GigaManf
G
SDETERS
  • Locked
  • Poll Poll
New Sketcher vs the old Sketcher
Replies
5
Views
6K
Toost
Toost
Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated

Part and Inventory Search

Sponsor

Back
Top