Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Conference CCRUG featuring NX6 and Synchronous Technology

Status
Not open for further replies.
josephv

josephv

Mechanical
Joined
Oct 1, 2002
Messages
683
Location
CA
Good day, hope all is great.

Here is a blog article we did on the Central Canada Regional Users Group (CCRUG) Conference which featured presentations on NX6, Synchronous Technology, and Product Template Studio.

 
Status
Not open for further replies.

Similar threads

hmichel
  • Question Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
7
Views
4K
SDETERS
SDETERS
SBlackBeard
  • Locked
  • Question Question
NX Journal for PMI and Location
Replies
2
Views
2K
cowski
cowski
Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
rookiezzz
  • Locked
  • Question Question
Monitor and access the data
Replies
1
Views
1K
cowski
cowski
CAD2015
  • Locked
  • Question Question
Create Sheet and Drawing templates........................
Replies
7
Views
4K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top