Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compress & Hydrotest Stress

Status
Not open for further replies.
BigTank

BigTank

Mechanical
Joined
Sep 24, 2007
Messages
368
Location
US
How does Compress calculate the stress reported as 'Stress during test psi' when the option for caculation is checked?

--------------------------------
Fitter, happier, more productive
 
Sort by date Sort by votes
I did find this:


I suppose I should've thought to look there first.

Without infringing on the ASME copyright, is there anything more that anyone can tell me about this method?

--------------------------------
Fitter, happier, more productive
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Amr Shams
  • Locked
  • Question Question
Assistance for Multi-Chamber Vessel Design in COMPRESS
Replies
2
Views
3K
amillsmuel
A
Amr Shams
  • Locked
  • Question Question
Inquiry on Flange Neck Thickness Adjustment During Hydrotest
Replies
0
Views
1K
Amr Shams
Amr Shams
Amr Shams
  • Locked
  • Question Question
Advisory Warning on CS-2 Vacuum Chart Temperature Limit- Allowable compressive stress
Replies
0
Views
2K
Amr Shams
Amr Shams
withak36301
  • Locked
  • Question Question
Seismic Calculations in Compress Without Supports
Replies
2
Views
1K
withak36301
withak36301
uglyspec
  • Locked
  • Question Question
Compress FEA Module
Replies
3
Views
1K
Sue23
Sue23

Part and Inventory Search

Sponsor

Back
Top