components not displayed after loading a assembly

[lklo]

hi

I'm trying to help one of our nx users - but I'm going in dead ends.

Problems is . after loading a big assembly only a few (5-10) component's is displayed .

The assembly ( about 2000 component's) seems to be loaded very well - but not displayed . (they are NOT hidden or blanked)

But when staying in assembly navigator on the top note and rightclick and then press "Show" everything is displayed.

When saving and closing , and opening Again , the problen is still there.

Someone here on board - have you experienced something similar ? - and figured it out ?

lklo[pre][/pre]

 

[jerry1423]

re you able to take a picture of the assembly tree and post it ?
Make sure all of the layers are turned on.
If you are in the model space then change to a differnt "canned" view. for example if you are in the trimetric view then change to something like the top view.

 

[daluigi]

What version of NX ?
We have the same here in NX85 for some assemblies and cannot understand what triggers that behavior.
Changing the view does re-work the display of all parts correctly.
GTAC has been contacted and is working on the issue.