Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

combination bearings of vertical motor

Status
Not open for further replies.

lahcen

Mechanical
Joined
Oct 23, 2013
Messages
34
Location
DZ
Hi;
we have in our plant a vertical pump (EBARA) with 10 stages; to pump propane.
the driver of this pump is a electric motor (Fuji electric).
my question is how to mount driving side bearing (which figure is correct? fig1 or fig2?
All information is attached.
Thanks.
New_Doc_2018-10-27_6__1_tivnjs.jpg
 
Contact the appropriate manufacturers sounds like the best way to go.

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top