Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

COLOR

Status
Not open for further replies.
proengineer

proengineer

Mechanical
Joined
May 28, 2001
Messages
74
Location
IN
Dear pro\e users,

Can i have instances of a part in different colors? Amish Bhushan Goel
Engineer
Hitech e Soft
amg@hitechesoft.com
 
Sort by date Sort by votes
I think quite a few have tried this, and the answer is no
If anyone out there knows better, then lets hear it
 
Upvote 0 Downvote
I have got the answer:

Copy the whole surface and give it a color. Repeat this again. Call tthe two surfaces in the family table and suppress on of them to get the desired sesults. Amish Bhushan Goel
Engineer
Hitech e Soft
amg@hitechesoft.com
 
Upvote 0 Downvote
I have got the answer:

Copy the whole surface and give it a color. Repeat this again. Call tthe two surfaces in the family table and suppress on of them to get the desired results. Amish Bhushan Goel
Engineer
Hitech e Soft
amg@hitechesoft.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

freerangequark
  • Locked
  • Question Question
Drawing Color versus Background Color
Replies
0
Views
570
freerangequark
freerangequark
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
1K
Designer_D
Designer_D
T
Random Color
Replies
1
Views
4K
eroslet@gmail.com
E
freerangequark
  • Locked
  • Question Question
Color / Appearance Issue
Replies
2
Views
443
3DDave
3DDave
Gerula
  • Locked
  • Question Question
CREO 2.0 -- Trouble with Automatically Loading .dmt Color Map File
Replies
0
Views
265
Gerula
Gerula

Part and Inventory Search

Sponsor

Back
Top