Clearance holes and counterbores

[jhake]

Currently, when I make a clearance hole and counter bore I have to make 2 holes. Is there a way to use thestandard hole feature to create my clearance hole and CB in one shot?

 

[kirancitd]

go through the picture. (Picture shown for threaded counter bore hole feature)


If you want with out thread you may have to select free hole and then go to sketch. finish the sketch with whatever shape you want and place it.View attachment 4276

 

[prohammy]

jhake,


If you want to be able to affect the 19 diameter dimension (grayed out in the above picture) as I suspect you do then change the following config option


hole_diameter_override


to


yes


And then you can modifiy the thru hole and the c/bore together on the above screen


Kev

 

[audctrl]

I think if you removed the threads (uncheck the "Include thread surface) kirancitd that you would also be able to adjust the

 

[leow_john]