Chevy smalblock engine model ?

[gotroho]

Is there anybody ho has modeled a chevy small block engine?

robert.holmberg@intermec.com

 

[procwb]

i'm sure that the chevy engineers have! i have never tried to find this model, but try searching on the web.

 

[T3]

I have done an exhaustive search for any automotive models such as engine blocks, transmissions, axles, etc.. I have found nothing. Native Pro files for Iges.



I too am very interested in finding models of automotive components. I am looking for space claim informationand graphical representation. I could not even find overall size dimensions.



Anyone with this information?



T3

 

[adicar01]

it's verry hard to find this kind of data, all the companys keep secure data away of web directory

 

[adicar01]

try www.automotiveweb.com

 

[skuld]

The problem with this request is that any GM models that are floating around will most likley to be in Unigraphics. Du to th ecompelxity if the model I would doubt any one would want to re-model the whole assy again in Pro/E....



Skuld... ^_^

 

[skuld]

The problem with this request is that any GM models that are floating around are most likley to be a Unigraphics file. Due to the compelxity of the model I would doubt any one would want to re-model the whole assy again in Pro/E....



Skuld ^_^

 

[T3]

I just need Iges Files!



T3

 

[gotroho]

I am shure there is a lot of auto entusiast engineers out ther ho has modeled a engine outline, the problem is that they don't now about this site, ore dont bother to upploade the files.



Regarding other automotive models, I hawe found a gearbox supplier, Hewland racing gearboxes and trans axles, they prowide .DXF files on their gearboxes

http://www.hewland.com/svga/homeIE.htm



Robert.

 

[Speling]

Hi

I have problem like all of you. I will start to work for one company, which makes armoured cars (modifying ordinary). I must make model of all cars with ProE and make some animations, and other marketing stuff. Is any chance to get all of that data

 

[Roger]

I have a zip file of one I made. It does not have all of the tapped holes and some of the pin locations are not 100% accurate as I measured the block with a tap measure. It will get you started.



Also, Chevrolet sells a book called Chevrolet Power. Has drawings of the block and HP heads. The exhaust ports are not the same as the standard heads, so be aware.

 

[Roger]

I have a zip file of one I made. It does not have all of the tapped holes and some of the pin locations are not 100% accurate as I measured the block with a tap measure. It will get you started.



Also, Chevrolet sells a book called Chevrolet Power. Has drawings of the block and HP heads. The exhaust ports are not the same as the standard heads, so be aware.

 

[Roger]

I have a zip file of one I made. It does not have all of the tapped holes and some of the pin locations are not 100% accurate as I measured the block with a tap measure. It will get you started.



Also, Chevrolet sells a book called Chevrolet Power. Has drawings of the block and HP heads. The exhaust ports are not the same as the standard heads, so be aware.

 

[rajthegr8]

hi

i have the same problem as you, although my requirement is not limited to just Chevy...it can be any car, so long as i have the specs of each and every part. is there anyone wyho can help me?