Casting rigid plastic part

[zshamir]

I'm looking for a set, for on-site casting of a machinable rigid plastic part.

 

[moltenmetal]

Epoxy casting resin.

 

[1gibson]

There are also some polyurethane casting resins available that look pretty good.

 

[zshamir]

Thanks 1gibson.
I'm looking for hardness of Shore D 70. Can polyurethane on-site casting set, meets with this requirement.

 

[berkshire]

zshamir,
Try these people :

http://www.industrialpolymers.com/product-list/rigid-castings-resins/

B.E.

You are judged not by what you know, but by what you can do.