Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cast Steel - Johnstown Works Grade SX, .10-.20 C

Status
Not open for further replies.
Andrewstructure

Andrewstructure

Structural
Joined
Dec 22, 2009
Messages
43
Location
US
Hey! I have some existing drawings from 2006 that specify "Cast Steel - Johnstown Works Grade SX, .10-.20 C".

Could you provide me any direction on the material specs?

This is for a furnace vessel lip ring at a BOP in the USA.
 
Status
Not open for further replies.

Similar threads

qcrobert
  • Locked
  • Question Question
How can steel manufacturer chemical composition differ from ASTM/ASME chem comp?
Replies
5
Views
1K
qcrobert
qcrobert
Mitul mehta
  • Locked
  • Question Question
ASTM A453 Grade 660 Class A/B/C/D
Replies
12
Views
1K
EdStainless
EdStainless
Tmoose
  • Locked
  • Question Question
ASTM E351 - Cast iron chemical analysis
Replies
3
Views
384
EdStainless
EdStainless
ENG2194
  • Locked
  • Question Question
SAE Steel Grades
Replies
1
Views
284
EdStainless
EdStainless
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G

Part and Inventory Search

Sponsor

Back
Top