Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Carburization of A-106B Tubes

Status
Not open for further replies.
dsphillips

dsphillips

Marine/Ocean
Joined
Aug 1, 2000
Messages
4
Location
US
We have a lean oil heating furnace with A-106b tubes. The approximate tube temperature (surface) is 750F. We have a haz-op item on this that says we need to verify that the tubes are not susceptible to carburization. Can someone lead me to a reference chart, or some other text to help me verify this. Thanks.
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Measurement of gamma prime in superalloys.
Replies
2
Views
8K
absaul02
A
efulm4444
  • Question Question
Strength of C36000 Brass at Elevated Temperatures
Replies
1
Views
491
MintJulep
M
A
  • Question Question
Heat treatment of 17-4PH separately cast specimens
Replies
13
Views
14K
mfgenggear
mfgenggear
mrmalcolm
  • Question Question
Non destructive testing of heavy thick plates
Replies
14
Views
10K
mrmalcolm
mrmalcolm
PRjuventus
  • Locked
  • Question Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus

Part and Inventory Search

Sponsor

Back
Top