Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Calculation of minimum bend radius for steel tube umbilical 2
- Thread starter norton920
- Start date
-
1
- #2
gr2vessels
Mechanical
norton,
This topic is vast and has more to it than a simple formula. It is subject of extensive international studies and some are even contradicting each other. My uni dissertation(long ago)was developed around this topic, 450 pages only scratching the surface of it.
I can only suggest to google the "tube bending radius" and select what's suited for your application. In the process you'll learn a lot...
cheers,
gr2vessels
This topic is vast and has more to it than a simple formula. It is subject of extensive international studies and some are even contradicting each other. My uni dissertation(long ago)was developed around this topic, 450 pages only scratching the surface of it.
I can only suggest to google the "tube bending radius" and select what's suited for your application. In the process you'll learn a lot...
cheers,
gr2vessels
-
1
- #3
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
