Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BLOCKS LIKE AUTOCAD

Status
Not open for further replies.

rosbrugh

Automotive
Joined
May 13, 2002
Messages
7
Location
US
I'm using CATIA V5R12. Is there anyway that you can make/use "blocks" like there is in autocad? I would really like to have the ability to drop/cut/copy repetative blocks into to my part sketches and my drafting drawings.
 
Can you elaborate? My access to any good or more than bare basic helps is very limited.

Terry
 
The online documents cover the creation and use of Catalogs very well.
 
For drawings you may also want to look under Mechanical Design/Interactive Drafting/2D Components in the online docs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top