May 7, 2005 #1 rosbrugh Automotive Joined May 13, 2002 Messages 7 Location US I'm using CATIA V5R12. Is there anyway that you can make/use "blocks" like there is in autocad? I would really like to have the ability to drop/cut/copy repetative blocks into to my part sketches and my drafting drawings.
I'm using CATIA V5R12. Is there anyway that you can make/use "blocks" like there is in autocad? I would really like to have the ability to drop/cut/copy repetative blocks into to my part sketches and my drafting drawings.
May 7, 2005 #2 lordrailie Marine/Ocean Joined Feb 16, 2005 Messages 64 Location ES u have to yuse catalogs Upvote 0 Downvote
May 8, 2005 Thread starter #3 rosbrugh Automotive Joined May 13, 2002 Messages 7 Location US Can you elaborate? My access to any good or more than bare basic helps is very limited. Terry Upvote 0 Downvote
May 9, 2005 #4 catiajim Aerospace Joined Dec 2, 2002 Messages 726 Location US The online documents cover the creation and use of Catalogs very well. Upvote 0 Downvote
May 16, 2005 #5 KooKoo Aerospace Joined Jan 20, 2003 Messages 131 Location US For drawings you may also want to look under Mechanical Design/Interactive Drafting/2D Components in the online docs. Upvote 0 Downvote
For drawings you may also want to look under Mechanical Design/Interactive Drafting/2D Components in the online docs.