Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bended foil as an Airfoil

Status
Not open for further replies.
JoseAero

JoseAero

New member
Joined
Oct 26, 2003
Messages
1
Location
ES
Can anybody help me with the shape (x,y) a piece of foil takes when bended over itself and hold in one end, I intend to use such symetrical airfoil for low Re drag reduction.

Thaks
 
Status
Not open for further replies.

Similar threads

stormloader
  • Locked
  • Question Question
Help Identifying Callouts in an Old Drawing
Replies
8
Views
9K
WKTaylor
WKTaylor
M
  • Question Question
how to calculate drag and lift coefficient at different airfoils of horizontal axis wind turbine blade
Replies
4
Views
6K
LiftDivergence
LiftDivergence
Franklin M.
  • Locked
  • Question Question
AS 9100
Replies
8
Views
611
Franklin M.
Franklin M.
Platypusimon
  • Locked
  • Question Question
MCI generation of an assembly, with different section cuts and phases
Replies
0
Views
288
Platypusimon
Platypusimon
MCA1983
  • Locked
  • Question Question
Why can't we use steel as wing instead of aluminum alloy
2
Replies
20
Views
1K
WKTaylor
WKTaylor

Part and Inventory Search

Sponsor

Back
Top