Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BEND INFO ON UNFOLDED VIEW 1

Status
Not open for further replies.
cadddict

cadddict

Mechanical
Joined
Jul 7, 2006
Messages
49
Location
ZA
I would like to know if it is possible to get the required bend info and bend line to appear automatically when the unfolded view is created similar to the way it does in Solidworks?...Attached are pics showing the same part unfolded in the two systems...

solidworksunfoldedview.jpg

catiaunfoldedview.jpg


 
Sort by date Sort by votes
I havent tested it but try this, create the 3d annotations in Functional tolerancing and annotation workbench then create your drawing. please let me know if it works

 
Upvote 0 Downvote
Edit (Default)GenerativeStyle.xml standard. There is a branch for Sheetmetal views. You can set UpDown status for bends visible. Bend axisline can be set there as well.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Question Question
Detail View - Section View
Replies
0
Views
1K
Proportions
P
A
  • Question Question
CATIA Macro to give Overall Dimensions to a View
Replies
3
Views
845
ferdo
ferdo
Chris Bills
  • Locked
  • Question Question
Catia 2D View Fix
Replies
3
Views
2K
Chris Bills
Chris Bills
howdyitssam
  • Locked
  • Question Question
Catia V5 Macro - SmartTeam info to Excel
Replies
3
Views
1K
Little Cthulhu
Little Cthulhu
CAD2015
  • Question Question
3DEXPERIENCE - Catia on cloud.........
Replies
5
Views
12K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top