Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Augered Cast-in-place Piers

Status
Not open for further replies.

tdsull

Structural
Apr 2, 2006
35
I am looking for design references for augered cast in place piers (Caissons).

The contractor wants to drill 14” piers/caissons through sand to support a 2 story structure. No geotechnical information available.

Thanks
 
Replies continue below

Recommended for you

No geotechnical information available.

I'd get some.

A good geotech will provide you with design criteria for determining the proper depth and diameter of the ACP's.

Without it you are placing yourself at risk.

 
Deep foundation without geotechnical data = very bad idea.

Get a geotechnical exploration and report, then proceed.

 
Definitely, you need a geotech!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor