Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Attaching nozzle to boot

Status
Not open for further replies.
sksmechanical

sksmechanical

Mechanical
Joined
Feb 18, 2010
Messages
36
Location
US
I have a boot (12.75"OD x 2'-6"L) attached to the shell at 180 degress (horizontal vessel) and I need to attached a 2" nozzle and 3/4" couplings to this boot. Any help is greatly appreciated
 
Sort by date Sort by votes
Since the boot is added to the vessel shell as a nozzle, you are then able to add nozzles to the boot by choosing the 'From End of Nozzle' option to locate the boot nozzles. See the attached COMPRESS file
 
 http://files.engineering.com/getfile.aspx?folder=299c4ed2-d463-43d7-a811-c40104e863a4&file=Boot_with_Nozzles.CW7
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JD P.E.
  • Locked
  • Question Question
Tangential Nozzle on Conical Transition
Replies
3
Views
872
Cobra17
Cobra17
Amr Shams
  • Locked
  • Question Question
NOZZLE WELDED TO BLIND FLANGE
Replies
0
Views
776
Amr Shams
Amr Shams
JEB1812
  • Locked
  • Question Question
Adding nozzle to bolted cover on App 2 flange
Replies
0
Views
683
JEB1812
JEB1812
Mark West
  • Locked
  • Question Question
WPS guidance - attaching AR400 liner to Carbon Steel ASME vessel stamped
Replies
0
Views
207
Mark West
Mark West
mechengineer
  • Locked
  • Question Question
use MAWP to check nozzle load & wind/earthquake loads
Replies
0
Views
191
mechengineer
mechengineer

Part and Inventory Search

Sponsor

Back
Top