Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assess Structural Load imposed by wind in ANSYS

Status
Not open for further replies.
Mhjbahrami

Mhjbahrami

Structural
Joined
Mar 31, 2014
Messages
2
Location
US
Hello to all,
I have a wind speed profile, and i want to apply the pressure to my structure which is a lattice tower using ANSYS program, i have to use CFD and if so i would appreciate any helpful tip on this subject.
thanks in advance.
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
408
SWComposites
SWComposites
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
raslraslov
  • Locked
  • Question Question
Setting up units in nCode when importing d3plot (ANSYS)
Replies
0
Views
566
raslraslov
raslraslov
Kamyar_K
  • Locked
  • Question Question
Changing the slip interface by loading rate
Replies
0
Views
373
Kamyar_K
Kamyar_K

Part and Inventory Search

Sponsor

Back
Top