Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME IX WPS for both manual and machine GTAW

Status
Not open for further replies.
stanweld99

stanweld99

Nuclear
Joined
May 2, 2013
Messages
27
Location
CA
For PQR coupon welded with manual GTAW Root pass + machine GTAW balancing, can the WPS be written to include both manual and machine GTAW process? it means that the WPS can be used for both manual and machine GTAW welding for the full thickness qualified from the PQR coupon.

Thanks for the help.
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

K
  • Question Question
GTAW WPS using GTAW/SMAW PQR
Replies
7
Views
8K
A.Nour
A
timsch
  • Question Question
ASME SEC.IX WPS filler designation
Replies
3
Views
595
DekDee
DekDee
timsch
  • Question Question
Question of scope of ASME BPVC SECTION IX
Replies
1
Views
9K
DekDee
DekDee
Karik87
  • Question Question
Combine thickness and diameter qualified range of welder according to ASME IX
Replies
4
Views
943
Karik87
Karik87
Motivated Apprentice
  • Locked
  • Question Question
Diameter in ASME IX
Replies
2
Views
985
Motivated Apprentice
Motivated Apprentice

Part and Inventory Search

Sponsor

Back
Top