Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Artifacts in contour plotting

Status
Not open for further replies.
maikscho

maikscho

Mechanical
Joined
Mar 15, 2013
Messages
1
Location
DE
thread569-307124

Hello,

I know, this thread was closed long ago. But I have the exactly same problem and solved it via the /SHADE command prior the picture export.
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
839
Rabea-19
R
pnomura
  • Locked
  • Question Question
Drop Test in Transient Structural
Replies
1
Views
1K
jamesdean2
jamesdean2

Part and Inventory Search

Sponsor

Back
Top