Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

APDL code for solving multiple geometry cases

Status
Not open for further replies.
Rodrigo Benitez

Rodrigo Benitez

Civil/Environmental
Joined
Oct 9, 2019
Messages
14
Location
BR
Hi guys,

I want to simulate several plates with same material, load and BCs but with different slenderness ratios, in order to evaluate stresses, like in the image below. In order to save time, I want to write the right APDL code to let Ansys calculate all these cases and get the results by the end.

image_tljdng.png


Any help would be much appreciated.
 
Status
Not open for further replies.

Similar threads

rcbsimoes
  • Locked
  • Question Question
ansys apdl, etab, max per row
Replies
1
Views
800
rcbsimoes
rcbsimoes
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
4K
TOM1345
T
rcbsimoes
  • Locked
  • Question Question
Shared Faces in Ansys APDL
Replies
0
Views
565
rcbsimoes
rcbsimoes
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
AndrewSkocz
  • Locked
  • Question Question
Ansys - Solving an input file using command line
Replies
3
Views
1K
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top