Anyone have the spec for NAS6303 THRU NAS6320? 2

[KirbyWan]

Howdy all,

I'm looking for the NAS spec sheets for NAS6303 Thru NAS 6320. I looked in the usual places. All I could find on the assistdocs website was the addoption notice saying the standard was adopted. Not very useful. Thanks for the help.

-Kirby

Kirby Wilkerson

Remember, first define the problem, then solve it.

 

[boo1]

They are copyrighted by, AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC.

http://global.ihs.com/?RID=AIA

You can get your $37 copy at:

http://global.ihs.com/doc_detail.cf..._doc_title=&org_code=AIA/NAS&fsc_codes='5306'

BOLT, TENSION, HEX HEAD, CLOSE TOLERANCE, A286 CRES, SHORT THREAD,REDUCED MAJOR THREAD DIA., SELF-LOCKING AND NONLOCKING, 160 KSI FTU

 

[KirbyWan]

I'll check with our document control. We have most of them but this one was missing, so maybe we have access to it but just don't have a paper copy in the binder.

Thanks,

-Kirby

Kirby Wilkerson

Remember, first define the problem, then solve it.

 

[dinjin]

You could also check your university libraries and see if they have it and fax it to you.

 

[KirbyWan]

I wish I had access to a University Library.

-Kirby

Kirby Wilkerson

Remember, first define the problem, then solve it.

 

[boo1]

What did you need from NAS6303 Thru NAS 6320 spec?

 

[rerig]

Un-official copy from seller

 

[KirbyWan]

Thanks rerig.

boo1, I was hoping to get shear and tension strenghts to use. I can calculate it, but generally when i need this information I prefer to just pull it from a spec for consistancy.

Thanks to everyone for your help.

-Kirby

Kirby Wilkerson

Remember, first define the problem, then solve it.

 

[boo1]

I checked the specification and could only find;
MATERIAL: A286(UNS S66286)
HEAT TREAT: AMS-H-6875 OR AMS2759: 160 – 190 KSI Ftu