admincae
Mechanical
- Apr 10, 2010
- 20
Hi all,
Can somebody help me, or can offer some support in my next necessity:
-to made a macro which can detect automatically all surfaces or lines (must have possibility to choose only one of them) in contact;
-gap betweens surfaces in contact must can be tolerated (0 -> ...+);
-only on surfaces whose distance is between the tolerances will be selected and made with her contact (contact + target);
-if will be added in FEM model supplementary geometry, the existing contact must be ignored and added supplementary contacts (without influence the already existing contact);
-contact type made by default must be bonded contact with criterion Pure Penalty;
-the generated contact must be recognized be contact pair, and must appear on contact pair;
This macro have own role to reduce hard work in ANSYS APDL.
I appreciate all support, any idea or suggestion which can help me to resolve my macro.
Best regards
Mess with the best die like the rest...ANSYS is the best !!!
Can somebody help me, or can offer some support in my next necessity:
-to made a macro which can detect automatically all surfaces or lines (must have possibility to choose only one of them) in contact;
-gap betweens surfaces in contact must can be tolerated (0 -> ...+);
-only on surfaces whose distance is between the tolerances will be selected and made with her contact (contact + target);
-if will be added in FEM model supplementary geometry, the existing contact must be ignored and added supplementary contacts (without influence the already existing contact);
-contact type made by default must be bonded contact with criterion Pure Penalty;
-the generated contact must be recognized be contact pair, and must appear on contact pair;
This macro have own role to reduce hard work in ANSYS APDL.
I appreciate all support, any idea or suggestion which can help me to resolve my macro.
Best regards
Mess with the best die like the rest...ANSYS is the best !!!