Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anhydrous Ammonia Pump (High Pressure)

Status
Not open for further replies.
wehber

wehber

Mechanical
Joined
Jul 29, 2006
Messages
8
Location
US
Hi,

I was wondering if anyone was familiar with a high pressure anhydrous ammonia pump. I am using this for a desuperheat configuration after gasous expansion. I am looking to go from 200 psi suction to 700 psi discharge max with a nominal flow rate of 1.5 GPM. I have looked at various mag-drive pumps but haven’t contacted any vendors yet. I wanted to gauge the communities input first.

Thanks!
 
Status
Not open for further replies.

Similar threads

Hartley Kingon
  • Question Question
Pressure Sewer Pump Station Documentation – Australia
Replies
1
Views
3K
pierreick
pierreick
giuman
  • Question Question
Pump modifications
Replies
5
Views
11K
TugboatEng
TugboatEng
BasakAbhishek
  • Question Question
Pump volute nomenclature
Replies
2
Views
5K
Artisi
A
L
  • Question Question
Pump shaft sheared
Replies
4
Views
6K
TugboatEng
TugboatEng
Giray Veli
  • Question Question
Pump Impeller
2
Replies
21
Views
21K
TenPenny
TenPenny

Part and Inventory Search

Sponsor

Back
Top