Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alternative to Waukesha Alloy 54C ??

Status
Not open for further replies.
Waterjetz

Waterjetz

Mechanical
Joined
Jul 20, 2000
Messages
7
Location
US
Can anyone here recommend a good alternative to Waukesha, which seems to be growing scarce (7 week back-order from the foundry). Need high strength, good corrosion resistance, decent machinability, good wear resistance, and anti-galling properties.
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Overly of ERCuAl-A2 over low alloy steel
Replies
6
Views
786
weldstan
weldstan
Maui
  • Question Question
New Patented High Speed Steel Alloys
Replies
16
Views
3K
Maui
Maui
Metma
  • Locked
  • Question Question
ASME B31.3 table 304.1.1 Low Alloy Steel
Replies
1
Views
370
MJCronin
MJCronin
BuonGiorno
  • Locked
  • Question Question
Force fitting a sleeve onto shaft when designed to be a shrink fit.
Replies
3
Views
2K
dgeesaman
dgeesaman
D
  • Locked
  • Question Question
etchant to confirm if silver brazing is on ferrous metal surfaces
Replies
15
Views
6K
dtimberlake
D

Part and Inventory Search

Sponsor

Back
Top