Allowable stress in AS 1210

[gr2vessels]

What is the allowable stress in AS 1210 for SA 266 gr 4?
Please advise...
Cheers,
gr2vessels

 

[hokie66]

Design tensile stress listed in Table 3.3.1 (A) as 120 MPa up to 350 C.

 

[gr2vessels]

Thanks hokie,
That means the Clause 3.3.9 (AMDT 2) does not apply, correct? If it does, then 120 x 4/3.5 = 138 Mpa (equal to ASME II Table D). Is it correct?
cheers,
gr2vessels

 

[hokie66]

I think the amendment applies, but I don't know whether it applies to your component. The Clause describes where the stress increase applies and where not.

 

[gr2vessels]

Thanks again,
Aparently the new AS 1210 will see out the 2008;- I heard this however sooo many times, that I'll believe it when I'll see it.
cheers,
gr2vessels